System Configuration; General - 3e Technologies International AirGuard 3e-525A-3 User Manual

Table of Contents

3e–525A–3 Wireless Access Point

On your computer, pull up a browser window and put the de-

fault URL for the 3e–525A–3 Local LAN in the address line. (https://

192.168.15.1)

You will be asked for your User Name and Password. The default is

"CryptoOfficer" with the password "CryptoFIPS" to give full access for

setup configuration. (This password is case-sensitive.)

System Configuration

You will immediately be directed to the System Configuration —

General screen for the 3e–525A–3 access point.

This screen lists the firmware version number for your 3e–525A–3 and

allows you to set the Host Name and Domain Name as well as establish

system date and time. (Host and Domain Names are both set at the fac-

tory for "default" but can optionally be assigned a unique name for each.)

You can also enter a description of the physical location of the unit in the

Physical Location field. This is useful when deploying units to remote

lcoations. When you are satisfied with your changes, click Apply.

29000167-001 B

Chapter 3: Access Point Configuration

Table of Contents