Saab 9-7X Owner's Manual page 186

N
(Repeat): With the repeat setting, one track or
an entire CD can be repeated.
To use repeat:
•
To repeat the current track, press and release
RPT ON displays. Press
play. RPT OFF displays.
•
For the Radio with Six-Disc CD player, repeat the CD
you are listening to by pressing and holding
two seconds. RPT ON displays. Press
turn off repeat play. RPT OFF displays.
y
4 (Random): Press to hear the tracks in random,
rather than sequential, order. RDM ON displays.
Press this pushbutton again to turn off random play.
RDM OFF displays.
y
(Random) (Radio with Six-Disc CD Player):
The CD tracks can be listened to in random, rather than
sequential, order, on one CD or on all of the CDs.
To use random:
•
To play the tracks on the CD in random order,
press and release the random button. RANDOM
ONE displays. Press this button again to turn
off random play.
3-66
N
N
again to turn off repeat
N
for
N
again to
•
To play the tracks on all of the CDs that are loaded
in random order, press and hold this button for
more than two seconds. A beep sounds and
RANDOM ALL displays. Press this button again to
turn off random play.
.
t u
SEEK : Press the left arrow to go to the start of the
current or the previous track. Press the right arrow to go
to the start of the next track. If a track is approximately
10 seconds into its song, press either the left or right
arrow twice to get to the previous or next track.
To scan tracks, press either arrow for more than
two seconds until one beep sounds and SCAN displays.
The CD searches the previous or next tracks at
two seconds per track. Press either arrow to stop
scanning.
To scan all loaded CDs on a Radio with Six-Disc CD
player, press and hold either arrow for more than
four seconds until CD SCAN displays and a beep sounds.
Use this feature to listen to 10 seconds of the first track
of each loaded CD. Press either arrow again, to stop
scanning.
DISP (Display): Press to see how long the current
track has been playing. The elapsed time of the track
appears on the display. To change the default on