Tire Terminology And Definitions - Saab 9-7X Owner's Manual

(B) Tire Width The three-digit number indicates
:
the tire section width in millimeters from sidewall
to sidewall.
(C) Aspect Ratio A two-digit number that
:
indicates the tire height-to-width measurements.
For example, if the tire size aspect ratio is 75, as
shown in item C of the passenger (P-Metric) tire
illustration, it would mean that the tire's sidewall is
75 percent as high as it is wide.
(D) Construction Code
indicate the type of ply construction in the tire.
The letter R means radial ply construction;
the letter D means diagonal or bias ply
construction; and the letter B means belted-bias
ply construction.
(E) Rim Diameter Diameter of the wheel in
:
inches.
(F) Service Description
indicates the load range and speed rating of a tire.
The load index can range from 1 to 279. Speed
ratings range from A to Z.
5-62
A letter code is used to
:
The service description
:
Tire Terminology and Definitions
Air Pressure The amount of air inside the tire
:
pressing outward on each square inch of the tire.
Air pressure is expressed in pounds per square
inch (psi) or kilopascal (kPa).
Accessory Weight This means the combined
:
weight of optional accessories. Some examples of
optional accessories are, automatic transmission,
power steering, power brakes, power windows,
power seats, and air conditioning.
Aspect Ratio The relationship of a tire's height
:
to its width.
Belt A rubber coated layer of cords that is located
:
between the plies and the tread. Cords may be
made from steel or other reinforcing materials.
Bead The tire bead contains steel wires wrapped
:
by steel cords that hold the tire onto the rim.
Bias Ply Tire A pneumatic tire in which the plies
:
are laid at alternate angles less than 90 degrees
to the centerline of the tread.
Cold Tire Pressure
:
a tire, measured in pounds per square inch (psi) or
kilopascals (kPa) before a tire has built up heat
from driving. See Inflation - Tire Pressure on
page 5-65.
The amount of air pressure in