Table of Contents
Advertisement
WARNING:
DO NOT let comfort or familiarity
instruction manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
on the tool.
1. Lock button 2. Switch trigger
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A
1. Reversing switch lever
1
2
1
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
CAUTION:
•
Always check the direction of rotation before
operation.
•
Use the reversing switch only after the tool
comes to a complete stop. Changing the direc-
tion of rotation before the tool stops may dam-
age the tool.
Hook
The hook is convenient for hooking the tool to your belt.
It can be installed on either side of the tool.
Changing the installation position of hook allows two-
way setting of 10 mm and 20 mm distance from the tool
itself.
The tool with hook can be hung on the waist belt, a
maximum diameter 20 mm pipe etc.
Place it on the tool and secure it with the clamping
screw to install.
1
1. Hook 2. Clamping screw
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
B
4 ENGLISH
2
Advertisement
Table of Contents
