Advertisement
1
Verify Kit Contents
Telescopic
Satellite
Installation CD
Antenna
Magnetic
Antenna Base
with Cable
BNC Antenna
Adapter
2
Install Software and Documentation
a
Insert the Digi m10 JumpStart Kit CD into your CD/DVD drive
b
If the Digi m10 JumpStart Kit installation does not start
automatically, simply double-click on "Setup.exe" in the CD's root folder
Note:
setup instructions below. This Quick Start Guide will then also guide you through
the initial setup of your satellite modem and sending a test message using the
Setup Wizard of the Satellite Dashboard application you just installed.
Set Up Your Hardware
3
a
Connect the USB cable to the development board and a corresponding USB port on your PC
Note: If a connection via RS232 is preferred instead of USB, simply attach the included serial cable to the DB9 connector
on the development board that is marked as "Host Port". Please also note that the DTR line (PWR_EN) must be asserted
when using an RS232 connection to the satellite modem.
b
Screw the BNC antenna adapter on to the development board's antenna connector
c
d
Connect the power supply to the development board and turn it on using the power switch
e
© Digi International, Inc., 2009
Digi, Digi International, Digi m10
l
and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
USB Cable
Serial Cable
Digi m10 Module and
Development Board
International Power Supply Adapters
c
Power Supply
e
b
d
Quick Start Guide
Digi m10
Satellite Modem
JumpStart Kit
(1P): 90033935-88 B
a a
™
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digi m10
Summary of Contents for Digi m10
- Page 1 © Digi International, Inc., 2009 Digi, Digi International, Digi m10 and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
- Page 2 It requires no separate service activation, however, completing the online registration process is required to ensure uninterrupted service. The 90-day satellite service starts after the rst time you transmit or receive data using your Digi m10 satellite modem. Please avoid excessive amounts of data transfers beyond approximately 100 messages/25 KB per month.
Need help?
Do you have a question about the m10 and is the answer not in the manual?
Questions and answers