Operating Instructions - iGenix IG9902 User Manual

OPERATING INSTRUCTIONS

Control Panel
Fig13.
1. Automatic Mode Indicator
2. Cooling Mode Indicator
3. Fan (ventilation) Mode Indicator
4. Heating Mode Indicator
5. Mode Button
6. Timer Mode Indicator
7. Timer Mode Button
8. Full Water Tank Indicator
9. Temperature Up Button
10. Display Window
Turning ON/OFF
Important: Ensure that hands are completely dry before plugging in the unit.
1. Manually adjust the Louvers (Fig 1 [2]) to the desired angle and position (Fig 14).
2. Plug the unit into the mains electricity supply.
3. Press the ON/OFF button (Fig 13 [12]). The unit will start automatically:
Room temperature above 24°C, the unit will work in cooling mode
Room temperature 20°C between 24°C the unit will work in fan mode
Room temperature below 20°C the unit will work in heating mode
Important: The indicator lights will show the function in progress
4. To turn the unit off press the ON/OFF button (Fig 13 [12]).
Important: The Display Window (Fig 13 [10]) shows the ambient room temperature from 0°C
to 50°C
Setting Mode/Function
• Press the Mode button (Fig 13 [5]) to select required function: automatic, cooling or fan.
The indicator light of selected mode will show.
11. Remote Control Receiver
12. ON/OFF (Power) Button
13. High Fan Speed Indicator
14. Low Fan Speed Indicator
15. Fan Speed (Ventilation) Button
16. Sleep Mode Indicator
17. Sleep Mode Button
18. Compressor Indicator
19. Temperature Down Button
Fig14.
7