The Wires - NordicTrack RW500 User Manual

5. Slide the Seat (23) to the front of the Rail (2).
Next, attach a Stop (32) to each side of the Rail
(2) with an M4 x 19mm Screw (69).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
6. While a second person holds the Upright (77)
near the Frame (1), connect the Neck Wire (108)
to the Main Wire (84).
Tip: Avoid pinching the wires. Attach the
Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82); start all the Screws,
and then tighten them.
7. Loosen and remove the Knob (78) from the
Upright (77).
Next, identify the Right and Left Upright Covers
(80, 81), and orient them as shown.
Tip: Avoid pinching the wires. Press the Right
and Left Upright Covers (80, 81) together around
the Upright (77), and attach them to the Upright
with two M4 x 16mm Screws (68).
Then, insert the Knob (78) into the Right Upright
Cover (80) and tighten it into the Upright (77).
5
69
32
69
69
38
6
Avoid
pinching

the wires

7
81
68
8
23
2
32
69
82
77
1
108
84
Avoid pinching
the wires
77
80
68
78