Interface Description ( Wap-6121 & Wap-8121 ) - LevelOne WAP-8121 Quick Installation Manual

l Interface Description
Button / Interface
LAN port
(10/100Mbps RJ45 port)
WAN / PoE port
(10/100Mbps RJ45 port)
RESET
(Reset to Default)
DC IN
(
WAP-6121 & WAP-8121
The LAN port is used to connect to network
devices, such as a switch or PC / NB
The WAN/POE port is used to connect to network
devices, such as a POE switch OR POE adapter
to power the device (
WAP-8121 / IEEE802.3at
( PoE adapter unit is to be ordered separately
With the AP powered on, press the Reset button
for 10~14 seconds until the Signal Strength LED
blink faster than ever. The AP will restart itself
and reset the device to factory default settings.
12V/1.5A DC input Power Adapter .
( Power Adapter unit is to be ordered
-3-
)
Description
WAP-6121 / IEEE802.3af
) 48 VDC.
separately)
,
)