Table of Contents
Advertisement
Interface Description
Marked
number
1
(10/100Mbps RJ45 port)
2
(10/100Mbps RJ45 port)
3
4
Interface / Button
LAN port
WAN/POE port
Reset to Default
DC
Description
The LAN port is used to connect to
network devices, such as a switch
or PC / NB
The WAN/POE port is used to
connect to network devices, such as
a POE switch OR POE adapter to
power the device. ( POE Power
adapter unit is to be ordered
separately)
WAB-6010 powered on, press the
Reset button for 10 seconds until
the Signal Strength LED blink faster
than ever. The AP will restart itself
and reset the device to factory
default settings.
12V/1A DC input injector (Power
adapter unit is to be ordered
separately)
Advertisement
Table of Contents
