Advertisement
l Interface Description
Button / Interface
RESET
(Reset to Default)
LAN port
(10/100/1000Mbps RJ45 port)
WAN / PoE port
(10/100/1000Mbps RJ45 port)
DC IN
With the AP powered on, press the Reset button for 10~14
seconds until the Signal Strength LED blink faster than ever.
The AP will restart itself and reset the device to factory default
settings.
The LAN port is used to connect to network devices, such as a
switch or PC / NB
The WAN/POE port is used to connect to network devices,
such as a POE switch OR POE adapter to power the device
(IEEE802.3at ) 48 VDC.
(
PoE adapter unit is to be ordered separately
12V/1.5A DC input Power Adapter .
(
Power Adapter unit is to be ordered
-2-
Description
)
separately)
Advertisement
