Table of Contents
Advertisement
S7 Server Manual
Last updated: 2/1/2016
Page 10 of 12
'Keep setting' is chosen by default and should be enabled if you want to keep your
current settings. You should deselect this option if you are trying to return the server to default
settings. Click 'Browse' button to choose upgrade file. Select the upgrade and click the
'Flash image...' button. The interface will display if the firmware can be upgraded and
download the software. During the upgrade process, you need to wait patiently, and must
keep power on, otherwise, the server can only be fixed with returned to factory. You will
see below screenshot after upgrading successfully.
Clicking the 'Reboot' button will restart the server so it can load the new software. Clicking
'Go Back' will keep the server running, before switching to the new software when it is
restarted next time or power cycled.
7.2 Password Modification
The S7 Server login password can be changed on the 'System->Administration' page.
Once modified, press 'Save and Apply' to save the new password.
Page 10 / 12
Advertisement
Table of Contents
