AntMiner Manual
Last updated: 11/26/2013
Page 9 of 9
6 System Configuration
6.1 Password Modification
Through 'System->Administration', you will be able to modify AntMiner login password, and
choose 'Save' and 'Save and Apply' after modifying it.
6.2 System Upgrading
Through 'System->Backup / Flash Firmware' you will be able to upgrade your miner.
'Keep setting' is chosen by default, you should choose it if you hope to preserve the current
settings. You should cancel this option if you hope to restore to initial settings.
Click 'Browse' button to choose upgrade file. After choosing upgrade file, then click 'Flash image...'
button to start downloading this file to your system. After downloading, please click 'Proceed'
button, then upgrade system. During the upgrade process, you need to wait patiently, and must
keep power on, otherwise, AntMiner will restore to initial settings. AntMiner will be connected
to login interface after finishing system upgrade.
Page 9 / 9