Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BITMAIN AntMiner S1
Summary of Contents for BITMAIN AntMiner S1
- Page 1 BITMAIN AntMiner Manual...
-
Page 2: Table Of Contents
AntMiner Manual Last updated: 11/26/2013 Page 2 of 9 Contents The first glance .......................... 3 Power Supply..........................4 Connect to Miner ........................4 WAN setting ........................4 WIFI setting ........................7 Pool Setting ..........................7 Miner Status ..........................8 System Configuration ........................ 9 Password Modification .................... -
Page 3: The First Glance
Page 3 of 9 1 The first glance AntMiner S1 is a blade style miner, which contains two blades. It has been assembled before Fab out. Bellow screen shows all AntMiner S1’s components: One blade miner can work separately, it is showed in bellow: Notice: 1. -
Page 4: Power Supply
AntMiner Manual Last updated: 11/26/2013 Page 4 of 9 2 Power Supply Connect the 12V Power line to the Power Supply socket. Note not to reverse positive (+12V) to negative (GND). 3 Connect to Miner 3.1 WAN setting Step 1. Read the IP address labeled in the Fan Bracket (Front). Manually set up your PC’s IP address in the network segment same as the miner’s IP address. - Page 5 AntMiner Manual Last updated: 11/26/2013 Page 5 of 9 Step 2. Connect miner and your PC via network cable. Step 3. Enter miner’s IP address into your web browser, then login miner management interface, both of username and password is ‘root’ by default. Setp 4.
- Page 6 AntMiner Manual Last updated: 11/26/2013 Page 6 of 9 Step 5. Modify the IP address of the WAN interface. Click “Network->Interface->WAN” to modify the IP address of WAN in the following page. Note: 1. WAN and LAN can’t be at the same network segment. Please set WAN to DHCP client or different network segment with WAN.
-
Page 7: Wifi Setting
AntMiner Manual Last updated: 11/26/2013 Page 7 of 9 3.2 WIFI setting There is WIFI built in the antMiner, and it can be used to connect to the Ethernet via another WIFI hot point. Note: Bad WIFI performance will reduce the antminer’s hash rate. You have to prepare the WIFI antenna by yourself. -
Page 8: Miner Status
AntMiner Manual Last updated: 11/26/2013 Page 8 of 9 5 Miner Status Through ‘Status->Miner Status‘, you will be able to check your miner running status. ASIC#: ASIC number in the chain Fan: Fan speed Temp: Temperature, centigrade Frequency: ASIC setting frequency ASIC status: o stands for OK, x stands for error. -
Page 9: System Configuration
AntMiner Manual Last updated: 11/26/2013 Page 9 of 9 6 System Configuration 6.1 Password Modification Through ‘System->Administration’, you will be able to modify AntMiner login password, and choose ‘Save’ and ‘Save and Apply’ after modifying it. 6.2 System Upgrading Through ‘System->Backup / Flash Firmware’ you will be able to upgrade your miner. ‘Keep setting’...