Pairing The Gateway; Windows Xp - Danfoss 105N9502 Operating Instructions Manual

Operating Instructions

3.1 Windows XP

Danfoss Bluetooth® Gateway with Tool4Cool® LabEdition

3. Pairing the gateway

In order to communicate, Bluetooth® devices must first be paired. Pairing is performed before using
the device for the first time. Pairing does not need to be repeated for subsequent use.
Please choose the operating system installed on your computer.
1. Attach or turn on the Bluetooth® radio adapter (transceiver) for your Windows XP computer.
2. Turn on the Danfoss Bluetooth® gateway by pressing briefly on the push button.
The LED will blink green.
Please note!:
The gateway runs for 60 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking.
If one stage of the pairing fails, turn the gateway on again, and try again.
3. Open Bluetooth® Devices in Control Panel/Printers and Other Hardware (Category view)
or Control Panel (Classic view).
Control Panel Category View:
Control Panel Classic View:
DEHC.PS.300.D1.02 7