Windows Vista - Danfoss 105N9502 Operating Instructions Manual

Operating Instructions

3.2 Windows Vista

10
Danfoss Bluetooth® Gateway with Tool4Cool® LabEdition
1. Attach or turn on the Bluetooth® radio adapter (transceiver) for your Windows Vista computer.
2. Turn the Danfoss Bluetooth® gateway on by pressing briefly on the push button.
The LED will blink green.
Please note!:
The gateway runs for 60 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking .
If one stage of the pairing fails, turn the gateway on again, and try again.
3. Open Bluetooth® Devices in Control Panel/Hardware and Sound.
4. Select Add then OK.
The wizard will open:
5. Check the Bluetooth® gateway is turned on.
Click the box My device is set up and ready to be found.
Select Next.
The wizard will search...
DEHC.PS.300.D1.02