Qualcast 407635 Instruction Manual page 25

Function of the swivel head
Note: The cutter head can be locked in nine positions (-45°~90°).
Hold the handle (D) tightly. Push the lock button (E) and then turn the cutter head (F) to the
desired position. Release the lock button (E) again and check whether the cutter head is
locked in place.
Using the hedge trimmer
WARNING! DO NOT exceed the cutting capacity of this product. Remove the
cut branches.
With its unique design, the pole trimmer can be used to trim and shape hard to reach areas
of hedges and bushes, such as those shown in the figure overleaf.
F
D
E
25