Trane TCONT402AN32DA Owner's Manual page 9

Features
Calibrate Outdoor Temperature
This option allows calibration (or deliberate miscalibration) of the outdoor temperature
(cont-)
sensor. The selected number is number of degrees, plus or minus, which will be added
to actual temperature. The number can range between + 5 and - 5 degrees in 1/2 degree
increments. Factory default is 0. This adjusted value will be used and displayed as ac-
tual temperature. For example, if 2 is selected, 72 degrees actual will read 74 degrees.
Comfort Information Drawer
The drawer attached to the mounting base of the control is designed to provide a con-
venient location for the user to locate their local servicer. A standard business card can
be folded and inserted into the slot on the drawer to remind the User whom to call when
service is required.
Page - 16
Pub. No. 22-5209-04
FILTER/OD
Filter/OD
Filter/OD
Page - 9
Pub. No. 22-5209-04
- If you press and hold the filter/OD keypad button for several seconds, the dis-
play changes to the Quick Setup option for the filter timer. Use the UP or DOWN
arrow keypad buttons to change the timer setting if desired, 1 - 180 days.
: Setting to 0 will disable filter timer.
NOTE
- Press the filter/OD button again to return to normal
display or just wait a few seconds and the display will
return on its own.