Lock - Unlock Keypad - Trane TCONT402AN32DA Owner's Manual

Keypad
FAN
Functions
(cont-)
Fan
Page - 6
Pub. No. 22-5209-04
Table 1
User
Setup
Menu Item
Options
Temperature
Display
Auto or Manual
(cont-)
Changeover
Setpoint Dead-
band
Waiting Icon
Cooling Droop
Energy Savings
- Cooling Set-
point Offset
Energy Sav-
ings - Heating
Setpoint Offset
Indoor Filter
Timer Method
Indoor Filter Re-
minder - Days

Lock - Unlock Keypad:

Press and hold Up Arrow and Down Arrow at the same time for several seconds.
Page - 19
Pub. No. 22-5209-04
- Pressing this key selects whether the indoor fan motor runs in automatic or con-
Fan
tinuous mode.
- For variable speed indoor equipment, if you press and hold the Fan button for
Fan
several seconds, the display changes to the Quick Setup option for continuous
fan airflow. Use the UP and DOWN arrow buttons to change the airflow setting.
NOTE: This feature is not available if the comfort control is set to BK Output
disabled in Installer Setup.
Setting (Choices)
Default (Press UP or DOWN
arrow)
0 = Fahrenheit
0
1 = Celsius
0 = Manual
1
1 = Auto
2 - 10 Degrees Fahrenheit
3
1.5 - 5.0 Degrees Celsius
0 = Disable
1
1 = Enable
0 = Off
1 1 = 1 Degree
2 = 2 Degrees
5 0 - 25 Degrees Fahrenheit
0 - 15 Degrees Celsius
0 - 45 Degrees Fahrenheit
5
0 - 25 Degrees Celsius
0 = Calendar Days
0
1 = Fan Run Time Days
1 - 180 Days
30
0 = Disable
("Keypad Locked" icon will display on LCD screen)
The FAN ON indicates that you have selected to oper-
ate the fan in continuous mode.
Pressing the Fan keypad button again returns the in-
door fan mode of operation to automatic and FAN ON
goes away.
Comfort Control Setup
Step
(Press Mode Menu Item Default
or Fan)
50 Calibrate Indoor
Temperature
51
Calibrate Outdoor
Temperature (Enabled
52
in step 9)
53 Calibrate Remote
Indoor Temperature
54
Continous Fan Airflow
Exit User Setup
(Press Mode)
55
Note: Pressing the Energy Saving Key ($) anytime during setup will advance to step 99.
56
Step 99 - Make setting selection and than press MODE to exit.
SAve = Save selections.
USer = Default User setting.
57
CAncel = Cancel Selections for current session and return tp previous session selections
58
Setting (Choices)
(Press UP or DOWN arrow)
Calibrated Room Temperature
0 + / - 5 Degrees (1/2 degree
increments)
Calibrated Outdoor Temperature
0 + / - 5 Degrees (1/2 degree
increments)
Calibrated Room Remote Indoor-
0 Temperature + /- 5 Degrees (1/2
degree increments)
50% 35% - 100%
CA = Cancel
SA SA = Save
US = Default User Settings
Step
(Press Mode or
Fan)
59
60
61
62
99
(Exit)