Adjusting Day And Time - Haverland ULTRAD Instruction Manual

4.7 Adjusting Day and Time

Your radiator is supplied with the clock and day of the week already factory set.
You must adjust the clock for changes between summer and winter times; this is an
automatic setting if you have the Smartbox (not included).
1
Press
A 'd' will appear on the display. Wait.
Then a number from 1 to 7 will appear
flashing to indicate the day of the week. Wait.
Adjust the day of the week by pressing
or . Wait.
2
'h' is displayed. Wait.
Then, the value indicating the hours will flash.
Adjust the hours using
3
Then, 'n' appears on the screen. Wait.
Then, the value indicating the minutes will flash:
Adjust the minutes using
Straight away, the working profile will appear and show the learning mode 'PE',
4
'Economy Profile'.
On the 'Economy' PE, the energy savings is prioritised, while on the Comfort Profile
'PC' it prioritises your comfort (please, read page 10).
To set up the profile using
Then, to finalise, the approximate room
temperature appears.
14
and buttons.
and
or
or
. Wait.
. Wait.
. Wait.
d
2
h
15
n
57
pE