Table of Contents
Advertisement
3.7 Standby
To switch the heater on and off press
3.8 Adjusting Day and Time
Your heater is supplied with the clock and day of the
week already factory set.
You must adjust the clock for changes between
summer and winter times (this is an automatic setting
if you have the Smartbox (not included)).
1. Press button
and
appear on the screen.
d
Wait.
Then a number from 1 to 7 will appear flashing to
indicate the day of the week.
Wait. Adjust the day of the week by pressing
. Wait.
2. "h" is displayed.
h
Wait.
Then, the value indicating the hours will flash.
15
Adjust the hours using
Page 34
.
NOTES :
ON = 1 sound bit.
OFF = 2 sound bits.
A light spot appears on the left
side of the screen.
button. A "d" will
2
and
. Wait.
3. Then, "n" appears on the screen.
Wait.
Then, the value indicating the minutes will flash:
Adjust the minutes using
Wait.
4. Straight away, the working profile will appear and
show the learning mode "PE", "Economy Profile".
On the "Economy" PE, the energy savings is
prioritized, while on the Comfort Profile "PC" it
prioritizes your comfort.
To set up the profile using
Wait.
Then, to finalise, the approximate room temperature
appears.
3.9 Other Indications
or
3.9.1 Heating Element ON Indicator:
When the heater is operating, pilot lamp 6 will be
on.
n
57
or
.
pE
or
.
6
Hide quick links:
Advertisement
Table of Contents
