Download Print this page

Troy-Bilt 11A-542Q711 Fast Start Manual page 2

Walk behind

Advertisement

Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with oil to upper limit of dipstick. Check
oil level by inserting (and not threading) dipstick
into filler neck.
a
b
Open fuel valve (a) and activate choke (b).
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
5
6
Oil Fill
Choke
7
Call 1-888-TO-HELP-U
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Gas Cap
Fuel Valve
Need Help?
8
Depress blade control handle and hold. The choke will
move slowly to OFF position – immediately proceed to
step 9 below.
Pull starter rope with quick, full armstroke. If engine
9
does not start after ten seconds of repeated pulls, wait
a few minutes and repeat steps 7b through 9.

Advertisement

loading