Troy-Bilt 11a-bobl.765 Quick Start Manual

A. Remove the wing nuts and carriage bolts
1
securing the upper handle to the lower
handle.
B. Remove T-bolts from
A
the handle brackets.
A
B
Pivot the upper handle
2
upward.
3
A. Pull upward on
the handle until
the holes in lower
handle line up
with the holes
in the handle
bracket.
© 2013 11A-B06
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
B
Starter
Rope Handle
Blade Control Handle
Wing Nuts
T-Bolts
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
B
A
A
B
C
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
Need Help? Call 1-888-TO-HELP-U
4
5
D
778-12364A