Instructions Guide; Basic Operation - MAJORITY PEMBROKE Instruction Manual

Instructions Guide

Basic Operation

Starting up your internet radio
Plug the adaptor connector into the back of the system labelled
'DC in' (Ref. 14) and turn the power on from the mains. Switch
the button at the back of the radio to 'ON' (Ref. 13) to display a
'Welcome' screen.
Ensure the antenna is extended as far as possible. This will
enable you to get the best signal you can.
After the Welcome screen, you will be able to select your chosen
language by scrolling with the Select Dial (Ref. 12). Select your
language by pressing down the Select Dial.
If this is the first time of using your radio, you will get the option
to set up your WiFi to stream Internet Radio with the message
"Would you like to configure network now?". If you select YES,
your radio will begin to scan for nearby networks to connect to.
If you select NO then you can set this up later in configuration
settings.
7