Installing The Reversing Video Camera - Dometic CAM 29S Installation And Operating Manual

CAM29S
7

Installing the reversing video camera

I
NOTE
If you do not have sufficient technical knowledge to install and connect the
components in vehicles, have a specialist install the reversing video camera in your
vehicle.
7.1 Fitting the camera
Observe the following information when selecting an installation location for the camera:
• Note the length of the camera cable.
• If you wish to use the camera as a reversing video camera, installing the camera on the top
middle of the vehicle bumper is recommended (fig. 4, page 4).
The installation location should be sufficiently firm (e.g. to prevent the camera from being
knocked down by branches that may brush the roof of the vehicle).
➤ Select a suitable installation location.
A
NOTICE!
Before drilling any holes, ensure that no electrical cables or other parts of the vehicle
can be damaged by drilling, sawing and filing.
➤ Install the camera in accordance with fig. 4, page 4.
I
NOTE
Make sure it is correctly aligned. If the camera is not correctly aligned, the picture will
be askew or upside down on the monitor.
➤ Check that the camera is installed securely.
EN
Installing the reversing video camera
9