Connecting Electrical Power To The Reversing Video Camera; Checking The Function And Setting The Camera - Dometic CAM 29S Installation And Operating Manual

CAM29S
➤ Route the camera cable into the interior of the vehicle so that it cannot be damaged under any
circumstances (e.g. by gravel impact).
➤ Lay the camera cable so that should you need to remove the camera, you can easily access the
plug connection.
9

Connecting electrical power to the reversing video camera

The circuit diagram for the reversing video camera can be found in fig. 6, page 5.
No. in
fig. 6, page 5
1
2
3
4
5
Connecting the camera
I
NOTE
Make sure the plug connections are assembled in such a way that the arrows on the
plug and the socket are pointing at each other.
➤ Insert the plug of the camera cable (fig. 6 2, page 5) as far as it will go into the 6-pin socket
(fig. 6 3, page 5) of the connection cable.
Ensure that the plastic cap of the socket reaches up to the arrow on the plug.
➤ Connect the 6-pin plug (fig. 6 4, page 5) of the connection cable to the monitor.
10

Checking the function and setting the camera

➤ Check the function of the camera after you have connected it to a monitor.
➤ Use the monitor picture to align the camera if necessary so that the picture on the monitor is
horizontal.
EN
Connecting electrical power to the reversing video camera
Description
Camera
6-pin mini DIN plug
6-pin mini DIN socket
6-pin plug
Monitor with 6-pin socket
11