Clock / Delays Menu - RC Systems ViewSmart 200 User Manual

Document: UM-1021
port is addressable, allowing many ViewSmart 200 controllers to be connected to a single
RS-485 cable.
 The ViewSmart 200 monitors signals from sensors that may require varying times to
stabilize after power is applied. The Warm Up Delay menu item allows setting how
long alarm relays remain disabled after power is applied.
 Cal Delay determines how long alarm relays are inhibited after completing a
calibration.
 The ViewSmart 200 is equipped with a 24-hour clock and calendar. Time and Date
menu items are for setting the correct time and date. Time of day must be entered in
24 hour mode. For example, 6:00:00 PM = is indicated as18:00:00.
ViewSmart 200/2050/2150 Controller User's Manual
Figure 2.12
2.3.4

CLOCK / DELAYS MENU

Figure 2.14
17
Revision Level B