Setup Menu Configuration - RC Systems ViewSmart 200 User Manual

ViewSmart 200/2050/2150 Controller User's Manual
Document: UM-1021 Revision Level B
LED's flash upon new alarms and become steady after Acknowledged by pressing the
ALARM RESET key. A SECURITY menu offers a password feature to prevent
tampering with ViewSmart 200 parameters.
Several signal conditioning input options are available to allow the ViewSmart 200
accept sensor and other analog signals directly (see section 3.1). A "sign-on" screen
appears briefly after power is applied that indicates what type input / output options the
unit is configured with.
2.1

SETUP MENU CONFIGURATION

Variables inside the CHANNEL (see section 2.2) and SYSTEM (see section 2.3) menu
trees allow ViewSmart 200 configuration for a wide range of monitoring applications.
Select the desired menu by scrolling with UP/DOWN and then EDIT to enter each
menu. Figure 2.0 illustrates the menus tree for configuring Channel variables on its right
side and System specific variables on the left side. Channel variables affect only the
specific channel selected while System variables are related to features not specific to
either channel.
7