SRM-3020T
4.
Hold trimmer head while
turning knob clockwise to wind
line onto spool until about
13 cm (5 in.) of each line
remains exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators
located at the bottom of the
®
Speed-Feed
head are worn
smooth, or if holes appear,
replacement of the cover or the
entire Speed-Feed
required.
Sharpening Metal Blades
Several styles of metal blades are approved for use on the Brush Cutter.
The 8-tooth blade can be sharpened during normal maintenance. The
clearing blade and 80-tooth blade require professional service.
X7502350100
© 04/2018 ECHO Inc.
®
head is
MAINTENANCE
41