SRM-3020T
Inspect shield for damage and ensure that shield is
◆
properly installed, and that that the cut-off knife is
securely in place. Replace if either is damaged or missing.
Check that the cutting attachment is firmly attached and in
◆
safe operating condition.
Assure that throttle trigger, throttle trigger lockout, and
◆
stop switch all work properly.
Check that handle and harness (if included) are
◆
adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
◆
sure all moving parts have come to a complete stop before
assembling unit, removing obstructions, clearing debris, or
servicing unit.
Do not connect spark plug lead to spark plug unitl unit is
◆
ready for use.
DO NOT start or operate unit unless all guards and
◆
protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
◆
Moving parts may not be visible through openings.
Position wiring safely to prevent snagging, separation of
◆
connectors, or breakage during operation. Gather excess
wire, and secure with wiring clamp if provided on
equipment, or tuck behind the air filter area. Do not place
wiring directly against hot engine components.
Check wiring and connectors for nicks, cuts, exposed wire,
◆
or other damage, and repair or replace as needed. Exposed
wire or connectors can cause shocks, sparks, and risk of
fire or explosion, resulting in serious injury.
Checkwire terminals for secrure connections.
◆
X7502350100
© 04/2018 ECHO Inc.
SAFETY
13