To Select Troller; Connecting - Mercedes-Benz COMAND Supplement Manual

Requirements
Apple CarPlay™ is available from the iPhone
R
5. Mercedes-Benz recommends that you use
the latest operating system on the iPhone
You require a connector cable for the
R
®
iPhone .
The full range of functions for Apple CarPlay™
R
is only possible when the Apple CarPlay™-
capable mobile phone is connected to the
Internet.
Connecting the iPhone
timedia system
In order to be able to use Apple CarPlay™, a
connection must be established between the
®
iPhone and the multimedia system.
®
Connect the iPhone via a connection cable
X
to the USB port ç.
The first time you connect an Apple CarPlay™-
capable mobile phone to the multimedia sys-
tem or switch between Apple CarPlay™-capa-
ble mobile phones, a prompt appears asking
whether you want future activation to be auto-
matic or manual.
Activating Apple CarPlay™
Automatic activation
To select Auto Auto : press the controller.
X
Apple CarPlay™ will start automatically each
time a connection has been established
®
between the iPhone and the multimedia sys-
tem.
Manual activation
To call up the telephone menu: press the
X
% button.
To show the main function bar: slide 5 the
X
controller.
To select Tel/ Tel/®: turn and press the control-
X
ler.
Select Apple CarPlay Apple CarPlay
X
Apple CarPlay™ starts.
i
Depending on the operating status, not all of
the steps may be necessary. A message to
start Apple CarPlay™ appears on the display.
Confirm this.
Changing the activation type
® When the mobile phone is disconnected from
the multimedia system, the activation mode can
be changed.
®
.
X
X
X
X
X
® with the mul-
X
X
Canceling Apple CarPlay™
Mercedes-Benz recommends that you only can-
cel Apple CarPlay™ when your vehicle is sta-
tionary.
X
Transmitted vehicle data
When using Apple CarPlay™, specific vehicle
data are transmitted to the mobile phone. This
makes it possible to use selected mobile phone
services efficiently. The mobile phone does not
have active access to vehicle data.
The following system information is transmitted:
R
R
These data are transmitted in order to optimize
communication between the vehicle and mobile
phone.
.
A random vehicle code is generated for this pur-
pose and in order to assign multiple vehicles to
the mobile phone.
This code is not related to the vehicle identifi-
cation number (VIN) and is deleted if the multi-
media system is reset (
Apple CarPlay™
To call up the telephone menu: press the
% button.
To display the main function bar: slide 5 the
controller.
To select Tel/ Tel/®: press the controller.
Select Apple CarPlay Apple CarPlay .
To show the menu bar: slide 6 the control-
ler.
To select Options: turn and press the con- Options
troller.
Deactivate ª or activate O
CarPlay Automatically CarPlay Automatically
Remove the connection cable from the USB
port ç.
The No Apple CarPlay Device Connec‐ No Apple CarPlay Device Connec‐
ted Please ensure that your device ted Please ensure that your device
is is connected connected to to the the correct correct USB
message appears.
Multimedia system software version
System ID (anonymous)
page 42).
Y
119
Start Apple Start Apple
.
USB port. port.
Z