Editing - Mercedes-Benz COMAND Supplement Manual

Destination entry
64
To select a POI: turn the controller and press
X
to confirm.
After selecting a POI or entering a destination,
the address of the intermediate destination is
displayed.
After entering a destination using the map,
the address entry menu is displayed.
highlighted.
To call up a map: select
X
pressing the controller.
You can move the map and select the desti-
nation.
To make a call: select
X
If the intermediate destination has a tele-
phone number and a mobile phone is con-
nected to the multimedia system
( page 90), the call is connected.
Y
To load data from the Internet: select
X
If an Internet address is available, data is loa-
ded from the Internet.
To store an intermediate destination in
X
the destination memory: select
( page 79).
Y
To accept an intermediate destination:
X
select OK OK by pressing the controller.
The destination is entered in the intermediate
destinations menu.
is highlighted.
Start Start is
Map Map by turning and
Call. Call
www. www
Save Save
Start Route Guidance Start Route Guidance
To enter another intermediate destina-
X
tion: slide 5 the controller and highlight
Add Add New: New:.
Press the controller.
X
Proceed as described above.
X
Editing intermediate destinations
The following editing options are available:
You can change intermediate destinations.
R
You can switch the sequence of the inter-
R
mediate destinations in the intermediate des-
tinations menu.
You can delete intermediate destinations.
R
To select an intermediate destination in the
X
intermediate destinations menu: turn and
press the controller.
A menu appears.
To change an intermediate destination:
X
select Edit Edit in the menu.
Select a new intermediate destination from a
X
category or via Other Other.
To select OK: turn and press the controller. OK
X
The intermediate destinations menu appears
and displays the changed intermediate desti-
nation.
You can change the order of the intermediate
destinations entered and the destination. To
change the order, at least one intermediate des-
tination and the destination must have been
entered.
To change the order: in the menu, select
X
Move Move.
Turn the controller and move the intermediate
X
destination or destination to the desired posi-
tion.
Press the controller.
X
To delete an intermediate destination:
X
select Delete Delete in the menu.