Calling Up - Mercedes-Benz COMAND Supplement Manual

Phone book
100
When you import, save, edit or add contacts,
they will be permanently saved in the multime-
dia system. These contacts will remain available
even when you connect the multimedia system
to a different mobile phone. You can view these
contacts even without a mobile phone.
Calling up the phone book
To call up the telephone menu: press the
X
% button.
To select Name Name in the telephone menu: turn
X
and press the controller.
If the phone book contains contacts, they will
be displayed in alphabetical order. The char-
acter bar at the bottom of the display is active.
You can now search for a contact
( page 100).
Y
Further information on the symbols shown
( page 100).
Y
i
You can also call up the phone book with the
multifunction steering wheel; see the Vehi-
cles Operator's Manual.
Symbol overview
Sym- Explanation
bol
Æ Contact that has been entered, edi-
ted or saved in the multimedia sys-
tem
\ Contact with voice tag
These contacts have also been
assigned a voice tag. For more infor-
mation, see the separate operating
instructions.
à Contact that was called up from a
mobile phone
¯ Contact imported from the SD mem-
ory card or USB device
®
Contact imported via the Bluetooth
interface
Searching for a contact
Using the character bar
You determine the first letter of the contact you
are looking for with the first character you enter.
To select characters: turn the controller and
X
press to confirm.
The first contact with the selected first char-
acter is highlighted in the phone book. If there
are similar contacts, the next different char-
acter is shown. For example, with contacts
such as Jana Jana and
names are identical. The next different char-
acter A A and O O are offered for selection.
Select the characters of the contact you are
X
searching for one by one, pressing and con-
firming with the controller each time.
To end the search: select ¬.
X
The contacts in the phone book are displayed.
To highlight a contact: turn the controller.
X
To call the contact: press the controller.
X
The G symbol indicates that a contact contains
more than one phone number.
To select a contact with the G symbol: turn
X
the controller and press to confirm.
The phone numbers are displayed. The G
symbol changes to I.
To call a telephone number: turn and press
X
the controller.
Back to the character bar
Press the % button repeatedly until the
X
character bar is displayed.
Further information about character entry
( page 28).
Y
Using the number keypad
You determine the first letter of the contact you
are looking for with the first character you enter.
For example, to enter the letter
X
l number key briefly three times in suc-
cession.
The character appears the first time the key is
®
pressed and shows all the available charac-
ters. It switches to the next character each
time the key is pressed.
John, the beginnings of the John
C C : press the