Dynamic Select - Mercedes-Benz COMAND Supplement Manual

DYNAMIC SELECT

50
Synchronizing the climate control set-
tings
Use O O Sync Sync (synchronization) to select the cli-
mate control setting for all zones together O or
separately ª.
This setting is made in the bottom bar of the
climate control menu.
Call up the climate control menu (
X
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To select O O Sync: turn and press the con- Sync
X
troller.
Switch the synchronization function on O or
X
off ª.
For further information on synchronizing climate
control settings (see the vehicle Operator's
Manual).
DYNAMIC SELECT
General notes
You can use DYNAMIC SELECT DYNAMIC SELECT
following settings for the Individual drive pro-
gram:
Drive system
R
Suspension
R
Steering
R
Climate control
R
ECO start/stop function
R
i
In a few countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available regardless
of the display in the multimedia system dis-
play.
The off-road drive program is only available on
vehicles with the Off-Road Engineering package.
You can set the following programs in the
road Settings road Settings menu:
Slippery
R
Off-road
R
Gradient
R
Rocking free
R
Trailer
R
Off
R
In addition, current vehicle and engine data is
visualized via the
Data Data menus.
There may be fewer settings depending on your
vehicle's equipment.
For further information on the Individual drive
program; see the vehicle Operator's Manual.
page 48).
Y
Configuration via the DYNAMIC
SELECT switch
i
There may be fewer settings depending on
your vehicle's equipment.
to configure the
Use the DYNAMIC SELECT switch to select
X
the Individual drive program; see the vehicle
Operator's Manual.
A window appears after a short while.
To confirm
X
The
appears.
To select
X
Climate Control Climate
tion tion: turn and press the controller.
The menu symbol, text and image show the
selected setting.
Setting off-road program
To switch the off-road program on: press
X
Off‐ Off‐
the Ç button.
A window appears after a short while.
To confirm
X
The
To select
X
Trailer, Trailer
press the controller.
The menu symbol, text and image show the
selected setting.
Vehicle Data Vehicle Data
Adjust Adjust: press the controller.
Individual Configuration Individual Configuration
Drive, Drive Suspension Suspension,
Control, Eco Start/Stop Func‐ Eco Start/Stop Func‐
Adjust: press the controller. Adjust
Offroad Settings Offroad Settings menu appears.
Slippery, Slippery Offroad, Offroad
Rocking Assist Rocking Assist or
and Engine Engine
menu
Steering, Steering
Incline, Incline
Off: turn and Off