Dynamic Select - Mercedes-Benz COMAND Supplement Manual

DYNAMIC SELECT

46
Synchronizing the climate control set-
tings
Use O O Sync Sync (synchronization) to select the cli-
mate control setting for all zones together O or
separately ª.
This setting is made in the bottom bar of the
climate control menu.
Call up the climate control menu (
X
Slide 6 the controller repeatedly until the
X
bottom bar is activated.
To select O O Sync: turn and press the con- Sync
X
troller.
Switch the synchronization function on O or
X
off ª.
For further information on synchronizing climate
control settings (see the vehicle Operator's
Manual).
DYNAMIC SELECT
General notes
You can use DYNAMIC SELECT DYNAMIC SELECT
following settings for the Individual drive pro-
gram:
Drive system
R
Suspension
R
Transmission
R
Sports exhaust system
R
®
R ESP (Electronic Stability Program)
In addition, current vehicle and engine data can
be visualized via the two further
and Engine Data Engine Data menus.
There may be fewer settings depending on the
vehicle equipment.
Configuration via the DYNAMIC
SELECT controller
Use the DYNAMIC SELECT controller to select
X
the Individual Configuration Individual Configuration
gram (see the vehicle Operator's Manual).
A window appears after a short while.
To confirm
X
The
page 45).
Y
setting the drive program appears.
To select
X
sion sion,
the controller.
The menu symbol, text and image show the
selected setting.
Displaying vehicle data
i
There may be fewer displays depending on
your vehicle's equipment.
Press
X
The vehicle menu is displayed.
To select
X
to configure the
the controller.
The Individual Individual Configuration
Data Data
Select
X
Updates of the following data are displayed:
Road type analogous to the selected drive
R
program
G-force display of longitudinal and lateral
R
acceleration
Accelerator and brake pedal activity
R
Vehicle Data Vehicle Data
Activity of the suspension struts
R
Wheel angle
R
Overrun mode animation
R
The G-force display is not available in all of the
drive programs.
Daytime or night-time view is shown depending
on the automatic light sensor.
Displaying engine data
i
There may be fewer displays depending on
your vehicle's equipment.
Adjust Adjust: press the controller.
Individual Configuration Individual Configuration
Drive, Drive Suspension Suspension,
Exhaust System Exhaust System or ESP: turn and press ESP
Vehicle Vehicle in the main function bar.
DYNAMIC SELECT DYNAMIC SELECT: turn and press
Configuration,
and Engine Data Engine Data menus appear.
Vehicle Data Vehicle Data.
drive pro-
menu for
Transmis‐ Transmis‐
Vehicle Vehicle