Remote Access From The Cloud; Preparing Your Unit For Remote Access - Netscout OneTouch AT G2 User Manual

Remote Access from the Cloud

You can connect remotely to a claimed OneTouch AT analyzer
and choose to control the analyzer or view its user files on 
Link-Live.com.
The claimed unit must be part of your organization or belong to
an organization of which you are a member.

Preparing Your Unit for Remote Access

Before your analyzer can be accessed from the Link-Live Cloud,
the Cloud Remote option needs to be enabled on the unit.
If the unit is not enabled for remote cloud access, it can still be
accessed from a VNC client via the management port address.
To enable remote cloud access:
1 On the analyzer's HOME screen, tap TOOLS
In the Cloud Tools section, touch the Cloud Remote button to
2
open the CLOUD REMOTE screen.
3 Enable remote access to the OneTouch by switching the
toggle to On.
A Cloud Remote icon
of the screen.
Chapter 13: Link-Live Cloud Service
Remote Access from the Cloud
Note
will be shown on the unit at the top
.
365