Wi-Fi Performance Setup Tab - Netscout OneTouch AT G2 User Manual

OneTouch AT and OneTouch AT G2
User Manual
Configure the Source OneTouch AT Analyzer
1 Connect AC power to the OneTouch AT analyzer. This ensures
that the unit will not run out of battery power, and will not
automatically power-down if a Timeout Period is set.
2 Create a Wi-Fi Performance user test, and view its setup tab.
Figure 65. Wi-Fi Performance Setup Tab
To run as "This OneTouch" Test Type
At the source OneTouch analyzer, in the Wi-Fi Performance test's
setup tab, ensure all options are set as described below.
146