Netscout OneTouch AT G2 User Manual page 215

This icon indicates the network's security level.

A green lock indicates WPA-Personal, WPA-Enterprise,
WPA2-Personal, or WPA2-Enterprise security are in use.
A yellow lock indicates WEP or 802.1X (using WEP encryp-
tion) are in use.
A red lock indicates that no security is in use.
A double lock indicates multiple security types are in use.

Note that the security type (e.g. WPA-Enterprise) is shown in
the network detail screen. See
 This is the network's name (its SSID). If the network name is
hidden (i.e. not broadcast), the name is displayed in brackets. A
hidden, unresolved name looks like this: [Hidden]. A hidden,
resolved name looks like this: [Network Name].
 These icons indicate the 802.11 type(s) of APs configured for
the networks detected by OneTouch. The 802.11 types in
ascending order are 802.11b, 802.11g, 802.11a, 802.11n, and
802.11ac.
 This icon changes based on the sort key that you select after
tapping the SORT button
shows the number of discovered access points supporting the
network. The clients icon
the network. The ad hoc icon
The signal strength icon provides a quick visual indication of

the network's signal strength as measured by the OneTouch
analyzer.
5 bars: greater than -50 dBm
4 bars: -50 dBm to -64 dBm
3 bars: -65 dBm to -74 dBm
2 bars: -75 dBm to -84 dBm
1 bar: -85 dBm or less
Chapter 8: Wi-Fi Analysis
page 202.
. The access point icon
shows the number of clients on
indicates an ad hoc network.
Network Analysis
199