Advertisement
makIng ConneCTIons
Connect the source instrument to the input using a standard ¼" instrument cable, set the appropriate load and connect
the XLR output to your mixer using a standard mic cable. The PZ-DI will convert the high-impedance unbalanced signal
to a balanced low impedance signal that will properly interface with the audio system. This will enable you to run long
balanced cables without noise or signal loss.
5
Radial Engineering Ltd.
PZ-DI™ User Guide
Advertisement
Need help?
Do you have a question about the PZ-DI and is the answer not in the manual?
Questions and answers