Radial Engineering Dragster Quick Start

Dragster

Pickup Impedance Control

Thank you for purchasing the Dragster, a super-compact device that lets you adjust

the load on your electric guitar pickups for a more natural sound through wireless

systems and pedal chains. Using the Dragster is simple: connect it between your elec-

tric guitar and any buffered input such as a guitar pedal or wireless transmitter. The

Dragster doesn't require any power to operate, and a mounting flange makes it easy

to permanently attach to a pedalboard or even mount on a guitar strap. A single dial

adjusts the load on your pickups, allowing you to experiment with the amount of Drag

applied for the perfect tone.

Table of Contents

Need help?

Do you have a question about the Dragster and is the answer not in the manual?

Page 1 Using the Dragster is simple: connect it between your elec- tric guitar and any buffered input such as a guitar pedal or wireless transmitter. The Dragster doesn’t require any power to operate, and a mounting flange makes it easy...
Page 2 1. Use the Dragster with a wireless system 2. Warm up your tone through a pedal chain Copyright Radial Engineering Ltd. Specifications & appearance subject to change without notice. Manual Part # R870 1049 00...