Advertisement
Quick Links
CVF-200 Installation
Quick Start Guide
The CVF-200 is a full-featured, GPS product designed for collateral asset protection in automobiles. The new, smaller-sized
devices are equipped with CalAmp's proprietary SkySmart technology, providing customers with any required OTA (over-the-air)
updates device updates, dual processor performance and standard battery backup. The CVF-200, when coupled with the
TM
LenderOutlook
collateral assurance solution, is ideal for vehicle finance, auto rental and location-based applications.
The CVF –200 series offers three device model options. All models include battery backup and a motion detector. The battery
backup provides protection against potential tampering, and the motion detector provides notification if a vehicle is towed.
Additionally, the CVF-200 series supports LenderOutlook's Mileage Manager and Location Validation Reporting.
P/N
Device Type Description
CVF-200-23
CDMA, Locate Only
CVF-200-24
CDMA, Locate with Starter Disable
CVF-200-27
CDMA, Locate with Starter Disable and Payment Reminder
CVF-200 Wiring Harness
Wire
Wire Gauge
1
22
2
22
3
22
4
22
5
22
6
22
CVF-200 INSTALLATION PROCESS – EASY AS 1-2-3
STEP ONE: SELECT THE INSTALLATION LOCATION
The CVF-200 must be installed in a horizontal position, label-side up and unobstructed by metal.
For optimal performance, CalAmp recommends
an in-dash installation.
•
above the gauge cluster
•
above the air vent
•
above the glove box
/
© 2015 CALAMP
MBUD-0278v1 | 05/2015
Color
Signal Name
Red
Power
Black
Ground
White
Ignition
Green
Output 0
Blue
Input 1
Blue/White
Output 1
Questions? Call: 888-823-7237 or Email: techspecialists@calamp.com
Backup
Disconnect &
Tow Alerts
Description
Primary power to the CVF 12V Nominal
Vehicle or Chassis Ground
Ignition wire
Output to Starter Disable Relay
Not Used
Output to Payment Reminder Buzzer
Location Validation
Analytics
Input/Output
Battery Positive
Battery Negative
Required for Starter Disable & Tow
Alert
Output to Starter Disable Relay
Not Used
Output to Payment Reminder Buzzer
On-line
Renewals
WWW.CALAMP.COM
Advertisement
Related Manuals for CalAmp CVF-200-23
Summary of Contents for CalAmp CVF-200-23
- Page 1 The CVF-200 is a full-featured, GPS product designed for collateral asset protection in automobiles. The new, smaller-sized devices are equipped with CalAmp’s proprietary SkySmart technology, providing customers with any required OTA (over-the-air) updates device updates, dual processor performance and standard battery backup. The CVF-200, when coupled with the LenderOutlook collateral assurance solution, is ideal for vehicle finance, auto rental and location-based applications.
- Page 2 STEP TWO: INSTALL THE CVF-200 AND OPTIONAL OUTPUTS CalAmp recommends power generation from the vehicle’s ignition harness. This is required for with use with the Starter Disable relay, Payment Reminder Buzzer and Tow alert. Note: Verify that the white wire is powered only with the key in the Engine On condition, not the ACC or radio key position.