Advertisement
Table of Contents
WindsOr
OperatiOn
04) starting at the highest
setting, adjust brush height
setting by setting until the
orange light turns off.
V
ersamatic and
01)
inspect brush for wear using a
credit card and replace if neces-
sary. (screwdriver necessary
to remove the brushes on some
models)
05) Unplug the cord from the
wall.
V
02)
Make sure all three prongs are
on the body of the cord and plug
into an outlet. i
f one of the Prongs
,
is missing
notify your suPerVisor
06)
Hold the strain relief in an up-
right position so that the strain
relief will not be damaged when
the cord is wrapped.
P
ersamatic
03) turn the machine on.
.
07)
Wrap the cord for storage start-
ing from the base. Wrapping the
cord properly will help prevent
cord failure.
lus
Advertisement
Table of Contents
Related Manuals for Windsor Versamatic
Summary of Contents for Windsor Versamatic
- Page 1 WindsOr ersamatic and ersamatic 03) turn the machine on. Make sure all three prongs are inspect brush for wear using a credit card and replace if neces- on the body of the cord and plug sary. (screwdriver necessary into an outlet. i...
- Page 2 01) release lever to remove 02) Replace bag when full. From 03) Replace filters quarterly. From front cover (versamatic left to right: versamatic plus left to right: versamatic plus plus) or back cover (versa- bag and versamatic bag. filter and versamatic filter.
Need help?
Do you have a question about the Versamatic and is the answer not in the manual?
Questions and answers