Table of Contents
Advertisement
Install an application appropriate UL-Listed external breaker (disconnect) for
Caution
each input line.
Conventions
»
bold
italic
monospace
TBX-1316 High-Voltage Attenuator Terminal Block
A calibration EEPROM is built into the TBX-1316. When the TBX-1316
is used in conjunction with an SCXI-1125, the EEPROM stores calibration
constants. These constants provide software correction values that the
application development software uses to correct measurements for gain
error in the attenuation circuitry. The EEPROM is shipped with nominal
values. Refer to the
Calibrating the TBX-1316
information.
The following conventions are used in this guide:
The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page Setup item, and select Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this icon is marked on the
product, refer to the Read Me First: Safety and Radio-Frequency
Interference document, shipped with the product, for precautions to take.
When symbol is marked on a product it denotes a warning advising you to
take precautions to avoid electrical shock.
When symbol is marked on a product it denotes a component that may be
hot. Touching this component may result in bodily injury.
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
2
section for calibration
ni.com
Advertisement
Table of Contents
