Russound DPA-1.2 Instruction Manual page 8

12-Volt Trigger In and Out: The Trigger
12V
12V TRIG
output is 12 volts at a maximum of
TRIG
OUT 100mA
INPUT
100mA. This can be used to drive a
relay- operated AC outlet or other 12-volt
triggered devices. The 12-volt trigger
input is used to activate the DPA-1.2 independently from the auto
turn on sensing circuit, in which case the delay, video and audio
sensing are bypassed.
Delay Time: The delay timecan be adjusted from about
DELAY
0.3 minutes to 8 minutes. The DPA-1.2 amplifier will
5 1
automatically switch to the default input signal after the
4 2
3
delay setting. (When set between 4 and 5, defeats delay
setting). When the audio or video source is no longer
playing, the DPA-1.2 will switch back to the default input after the
set delay time.
Power: The DPA-1.2 is set at the factory
AC
120V
for operation of either 120 VAC 60Hz or
60Hz
2A~
230 VAC 50Hz. Please reference the
voltage rating on the back panel.
Includes detachable 2 terminal power cord.
8