Replacing the processor fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the processor-fan cable to the system board (CPUFAN).
2
Align and snap the processor fan over the processor heat sink.
Post-requisites
1
Replace the
top
2
Replace the
base
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
Before
39