Replacing The Processor Liquid-Cooling Assembly - Alienware AURORA D0IM Service Manual

Table of Contents

Advertisement

Replacing the Processor Liquid-Cooling Assembly

1.
Follow the instructions in "Before You Begin" on page
2.
Align the screw holes on the processor liquid-cooling assembly with the
screw holes on the back of the chassis.
3.
Replace the four screws that secure the processor liquid-cooling assembly
to the chassis rear wall.
4.
Tighten the four captive-screws that secure the processor liquid-cooling
assembly to the system board.
5.
Connect the processor liquid-cooling assembly cables to the top
lighting-board connectors (SYS FAN) and (CPU PUMP).
6.
Replace the left side-panel (see "Replacing the Left Side-Panel" on page
7.
Connect your computer and devices to electrical outlets and then turn
them on.
6.
11).
CHAPTER 9: PROCESSOR LIQUID-COOLING ASSEMBLY
049
/
049

Advertisement

Table of Contents
loading

Table of Contents