NEC NVM-2000 Installation Manual page 13

From power supply
(any one of 3 connectors)
Issue 1-0
17. Select one of the three available (extra) power supply connectors and connect the power sup-
ply to the expansion hard drive. See Figure 14.
Note: You may find that the available (extra) power supply wires with connectors are bundled
and secured with pull-ties. If they are, carefully cut the pull-ties with a pair of diagonal
cutters.
Note: For clarity, floppy ribbon cable and
18. Replace the cover of the Voice Mail cabinet and secure in place with screws retained in step 6.
19. Connect the monitor cord and the keyboard cord.
20. Connect the system power cord.
Note: Do not turn on system power.
21. Go to Write the Hardware Settings for the New Drive to CMOS on the next page.
Installing an Expansion Drive
master hard drive power wires are
not shown.
Figure 14
Install the Drive
DT-expHD-15
9