4-Bay Power Unit - Pm-X00-520 & Pm-X00-522; 4-Bay Power Unit And Operation - BRASSELER USA BSP MAX II Instructions For Use Manual

4-Bay Power Units – PM-X00-520 (110V) & PM-X00-522 (230V)
The 4-Bay Power Unit can be configured with a combination of Charging Bay(s) and Bay Cover(s). The 4-Bay
Power Units (PM-X00-520 and PM-X00-522), Standard Battery Pack Charging Bay (PM-X00-731) and Charging
Bay Cover (PM-X00-521) are sold separately. The power unit charges up to four battery packs simultaneously.
4-Bay Power Unit Fuse Replacement
1. Set the main power switch to OFF (O).
2. Disconnect the power cord.
3. Squeeze and pull out the fuse holder.
4. Replace with two (2) T6.3A (250V) fuses.
5. Replace fuse holder.
Off/On
6. Connect the power cord.
Extra female Power Cord Fuse Main Power Switch
chaining connector, Connection holder
7. Set the main power switch to ON (-).
DO NOT USE
4-Bay Power Unit Operation
1. Set the main switch to the OFF position (O).
2. Connect the female end of the power cord to the power cord connection on the back of the power unit.
3. Connect the male end of the power cord to the wall outlet.
4. Activate 4-Bay Power Unit by depressing the main power switch to the ON position (-). Indicator lights will
pulse when Power unit is activated. Indicator lights will illuminate when a Batter Pack is inserted.
9