Cleaning Recommendations - BRASSELER USA BSP MAX II Instructions For Use Manual

Four station modular battery charger, 4-bay power unit, 110/230v, standard battery pack charging bay
Hide thumbs Also See for BSP MAX II:
Table of Contents

Advertisement

Cleaning Recommendations

General Cleaning Precaution:
• Follow universal precautions and protective apparel
when handling and cleaning contaminated
instruments.
Warnings:
• DO NOT use if damage is apparent.
• DO NOT use 4-Bay Power Unit in the presence of
explosive gases.
• DO NOT operate the 4-Bay Power Unit with a
damaged power cord or plug.
• DO NOT disassemble or service the 4-Bay Power Unit.
Return to Brasseler U.S.A. Medical, LLC, Service
Department.
14
Cautions:
• DO NOT immerse the 4-Bay Power Unit or
Charging Bays in liquid.
• DO NOT use solvents, lubricants, or other
chemicals to clean the 4-Bay Power Unit or Charging
Bays unless otherwise directed.
• DO NOT allow water to collect on the 4-Bay Power
Unit or Charging Bays.
• DO NOT sterilize the 4-Bay Power Unit or Charging
Bays.
• DO NOT clean the charging contacts with
abrasives.
• Prior to changing fuses, set power unit main switch
to OFF (O), then disconnect power cord.
• DO NOT use in operating rooms or locations with
explosive gases.
• DO NOT connect 4-Bay Power Unit in series.
• Remove battery packs from charging bays when 4-
Bay Power Unit is off to avoid battery discharge
and/or irreparable damage to the battery cells.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm-x00-520Pm-x00-522Pm-x00-731

Table of Contents