Table of Contents
Advertisement
Analog Picture Controls
The analog picture controls can be adjusted with the RCU. The
control keys are located on the lower right side of the key panel of
the RCU and indicated with the name of the control and an icon.
When an analog picture control is pressed, a text box with bar
scale and the function name of the control, e.g. 'brightness...'
appears on the screen (only if 'TEXT' is ON). The length of the bar
scale indicates the current memorized setting for this source. The
bar scale changes as the + or - buttons of the control are pressed.
Brightness Control
A correct 'brightness' setting is important for good image repro-
duction. Adjust the brightness with the + or - button (RCU) until the
darkest parts of the picture appear black.
A bar scale gives a visual indication on the screen of the current
brightness setting while pressing on the above indicated keys. If
the bar scale is not visible on the screen, press 'TEXT' key once
and retry the above indicated keys.
The bar scale increases when pressing on the + button (higher
brightness) and decreases when pressing on the - button (lower
brightness).
Contrast Control
A correct 'contrast' setting is important for good image reproduc-
tion. Adjust the contrast to the level you prefer, according to room
lighting conditions. If the Contrast Control is too low, the picture will
be too dim. If it is set too high, the picture may be too bright and
not sharp. A bar scale gives a visual indication on the screen of the
current contrast setting while pressing the + or - buttons (RCU). If
the bar scale is not visible on the screen, press 'TEXT' key once
and retry the above indicated keys.
The bar scale increases when pressing on the + button (higher
contrast) and decreases when pressing on the - button (lower con-
trast).
Color Saturation Control
Color saturation is only active for Video and S-Video. Adjust the
color intensity of the picture. Adjust the color saturation using the
= and - buttons (RCU) or pushing the control disk to the left or to
the right (local keypad). A bar scale gives a visual indication on the
screen of the current color setting while pressing on the above indi-
cated buttons. If the bar scale is not visible on the screen, press
'TEXT' key once and retry the above indicated buttons. The bar
scale increases when pressing on the + button (richer colors) and
decreases when pressing the - button (lighter colors).
BRIGHTNESS
40
Tint Control
Tint is only active for Video and S-Video. Tint control is effective
only when using the NTSC 4.43 or NTSC 3.58 system. A bar scale
gives a visual indication on the screen of the current tint setting
while pressing the + or - buttons (RCU) or pushing the control disk
to the left or to the right (local keypad). If the bar scale is not visi-
ble on the screen, press the 'TEXT' key once and retry the above
indicated buttons.
The bar scale increases when pressing on the + button and
decreases when pressing the - button.
Sharpness Control
Sharpness control is only active for Video and S-Video. A bar scale
gives a visual indication on the screen of the current sharpness
setting while pressing the + or - buttons (RCU) or pushing the con-
trol disk to the left or to the right (local keypad). If the bar scale is
not visible on the screen, press 'TEXT' key once and retry the
above indicated buttons.
The bar scale increases when pressing on the + button (sharper
picture) and decreases when pressing on the - button (softer pic-
ture).
The Pause key
When the Pause key is pressed, the image projection is muted but
the projector remains with full power for immediate restart.
To restart the image :
- Press the Pause key,
- Select a source number.
The GENERAL ACCESS MENU is available
from the LOCAL KEYPAD.
Press the ADJ 3X to display.
4-4
GENERAL ACCESS
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Quit ADJUST
Select with
or
then <ENTER>
<EXIT> to return
Controlling
Advertisement
Table of Contents
