Runco Reflection DR-300c Owner's Operating Manual page 31

COMMAND PARAMETER
!STORE
!RESTORE
!FACTORY
!STATUS
!RESTART
!ECHO
!NOECHO
!INSTALLMODEOFF
!INSTALLMODEON
!SERVICEMODEON
!SERVICEMODEOFF
RGAIN
GGAIN
BGAIN
ROFFSET
GOFFSET
BOFFSET
Value stored?
(min/max)
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
-64/64
-64/64
-64/64
-64/64
-64/64
-64/64
29
DESCRIPTION
YES Stores the current set of values
(all values) into non-volatile
memory
YES Restores the stored values
YES Restores all values to factory
default levels
NA Asks the Controller to provide
the hardware information,
current values and system status
to the automation system
NO Restarts the PFP Controller
(same as turning it on and off)
NO Enables the Controller to echo
back commands and values to
the automation system
NO Disables the PFP Controller's
character echoing
NA Disables the Installation menu
(removes it from the main menu)
NA Enables the Installation menu
(enables it on the main menu)
NA Enables the service mode
NA Disable the service mode
NO Adjust the Red Gain of image
NO Adjust the Green Gain of image
NO Adjust the Blue Gain of image
NO Adjust the amount of Red in the
dark areas of the image
NO Adjust the amount of Green in
the dark areas of the image
NO Adjust the amount of Blue in
the dark areas of the image